James C. Hobbs v. Wisconsin Power & Light Company and William Powell Company , 250 F.2d 100 ( 1957 )

250 F.2d 100

115 U.S.P.Q. 371

James C. HOBBS, Plaintiff-Appellant,
v.
WISCONSIN POWER & LIGHT COMPANY and William Powell Company,
Defendants-Appellees.

No. 11973.

United States Court of Appeals Seventh Circuit.

Dec. 6, 1957.

H. F. McNenny, Cleveland, Ohio, William H. Spohn, Madison, Wis., B. D. Watts, Cleveland, Ohio, Spohn, Ross, Stevens, Lamb & Pick, Madison, Wis., Richey, Watts, Edgerton, McNenny & Farrington, Cleveland, Ohio, for apellant.

Donald R. Stroud, Madisn, Wis., Edward A Haight, Chicago, Ill., Frank Zugelter, Cincnnati, Ohio, John W Hofeldt, Chicago, Ill., for appellee.

Before FINNEGAN, HASTINGS and PARKINSON, Circuit Judges.

HASTINGS, Circuit Judge.

1

This action was brought to enjoin and to seek an accounting for damages resulting from alleged infringement of two patents on inventions relating to valves and joint seals for large flows of high temperature, high pressure fluids. Appellant, James C. Hobbs, maintains that William Powell Company, by manufacturing and selling certain valves and joint seals, and the Wisconsin Power and Light Company, by buying and using these same accused structures, have infringed the patents in suit. The district court held that claims 1 through 10, 12 through 15, 17, 19, 20, 22 and 23 of patent Re. 23,272 and claims 1, 5, 6 and 7 of patent Re. 23,137, presented for adjudication at the trial, were invalid, and ruled further that there was no infringement by appellees as to 'any valid claim of any letters patent of the United States owned by the plaintiff.' The district court's findings of fact, conclusions of law and judgment are printed at 145 F. Supp. 64, 71 (1957). Error relied upon in this appeal arises from alleged erroneous applications of the law to the facts by the trial court.

2

The district court indicated in its findings that prior to 1938 there had been a long standing valve problem of preventing the body-bonnet joints of steam plant bolted bonnet valves from being pried open due to pressure and temperature forces. The bolted bonnet valves include a cover or bonnet, removably bolted to a flange around the access opening in the body (pipe) by a circle of bolts. A ring of compressible material such as asbestos or soft metal is used to seal the crevice between the bolted flanges of the bonnet and the body. The joints are sealed initially by tightening the bolts, but the joints tend to leak from the loads created by temperature changes and the pressure of confined liquid. Patent Re. 23,272 sought to eliminate this leakage and maintenance problem. Appellant maintains that a new result was achieved by a new combination and arrangement of parts and that, briefly, this result was 'accomplished by a floating guide slidably telescoped in the body' to align the valve stem with the valve seat in the body (instead of the fixed guide of the prior art), a pressure sealing joint between the floating guide and the cylindrical wall of the body, and a yoke connected to transmit forces from the valve stem to the body so that none of the forces could act to open the joint.

3

Patent Re. 23,137 relates to alleged new seals for the ends of pipes carrying fluids under high pressures. It is appellant's contention that there is nothing in the prior art showing the claimed pressure seal joint with a wedge-shaped sealing ring contacting at its thin end a conical surface of an inner member and a substantially cylindrical wall of the body, the sealing ring being inclined at a small angle of 'approximately 2 degrees' to the conical surface of the inner member.

4

Patent Re. 23,272 was granted September 26, 1950 on application filed April 29, 1950 for the reissue of patent number 2,321,597, dated June 15, 1943 which was granted on application filed February 23, 1940. Patent Re. 23,137 was granted July 26, 1949 on application filed May 26, 1949 for the reissue of patent number 2,443,187 dated June 15, 1948 which was granted on application dated August 15, 1944. Both reissue patents are the property of the appellant, James C. Hobbs, who, after studying and teaching mechanical engineering at the Carnegie Institute of Technology started working, in 1911, in the operation and design of steam power equipment. While working with the Diamond Alkali Company at Painesville, Ohio, he designed and built in 1928 and in 1933 to 1934, two steam power plants to generate steam at higher temperatures and pressures than used previously by that company. It is appellant's contention that prior to June of 1937, he and his assistants at Diamond Alkali had completed a series of drawings disclosing the invention of patent Re. 23,272 and that a final drawing, submitted in evidence as exhibit 52, was made up from this series. The court found that this drawing was sent to leading valve manufacturers along with requests for bids for necessary valves for a proposed new high pressure plant. It is admitted that Powell Company did submit to appellant's company several drawings of proposed steam and water valves of various types, incorporating much designing effort and skill on the part of Powell Company personnel, and that subsequently, Powell Company manufactured and sold the pressure seal valves to Diamond Alkali. The district court found also that these valves 'embodied a pressure seal joint having a differential angle between the metallic ring, the bonnet and the body and which responded fully to Claims 1, 5, 6 and 7 of Patent Re. 23,137 * * * .' These pressure seal valves went into operation June 3, 1939, were used successfully in the Diamond Alkali plant and achieved widespread acceptance and extensive commercial success.

5

The district court concluded that patent Re. 23,272 was invalid because the patentee was not the original and first inventor, because the alleged invention amounted to an exhausted combination or an aggregation of old elements, because of anticipation and want of invention, and, finally, because the patent specification did not contain, 'a written description of the alleged invention, and of the manner and process of making and using it, in such full, clear, concise and exact terms as to enable any person skilled in the art to which it pertains, to make and use the same, and does not set forth the best mode of carrying out the alleged invention.' Patent Re. 23,137 was determined invalid for anticipation and want of invention and also because the subject matter of the patent was in public use or on sale more than one year before the patent application was filed by the patentee.

6

Appellant maintains that the trial court erred as to all of these conclusions, and that each involves an erroneous application of the law to the facts. A regularly issued patent is presumed valid until the presumption has been overcome by convincing evidence of error. Mumm v. Jacob E. Decker & Sons, 1937, 301 U.S. 168, 57 S. Ct. 675, 81 L. Ed. 983; Radio Corp., Laboratories, 1934, 293 U.S. 1, 54 S. Ct. 752, 78 L. Ed. 1453. The question of whether or not a trial court has employed the correct criteria of invention in determining the validity of a patent is one of law subject to review on appeal. Great A. & P. Tea Co. v. Supermarket Equipment Corp., 1950, 340 U.S. 147, 71 S. Ct. 127, 95 L. Ed. 162; Noble Co. v. C. S. Johnson Co., 7 Cir., 1957, 241 F.2d 469, 475. Also, this court, under Rule 52(a) of the Federal Rules of Civil Procedure, 28 U.S.C.A. must make due allowance for the advantages possessed by the trial court in resolving any conflicting testimony, reversing only clearly erroneous findings of fact. Weller Manufacturing Co. v. Wen Products, Inc., 7 Cir., 1956, 231 F.2d 795, 797; Noble Co. v. C. S. Johnson Co., supra. After a careful consideration, in line with these holdings, this court concludes that the contentions of appellant are, on the whole, without merit.

7

Closely related questions arise in the determination of whether the patentee, Hobbs, was the inventor of the subject matter of the patent (see 35 U.S.C.A. 102(f)) and the determination of whether there was anticipation by, and lack of invention over, the prior art as to this purported invention. (See 35 U.S.C.A. 102(e), and 103.) Appellant urges that he conceived the principle of invention, embodied it in a drawing (exhibit 52) and disclosed that drawing to Powell Company. Appellant then contends that the trial court was misled by evidence that Powell Company had contributed a certain amount of engineering and designing skill in the construction of the pressure seal valves into the conclusion that the patentee was not the sole first and original inventor. It is fundamental that an inventor is one who discovers the new principle of an invention and that he is not deprived of the right to patent by the fact that others performed the engineering and mechanical work. United Shirt & Collar Co. v. Beattie, 2 Cir., 1906, 149 F. 736, 741-742, certiorari denied 205 U.S. 547, 27 S. Ct. 795, 51 L. Ed. 924; Walker, Patents, Deller's Edition 399. Appellant, in thus presenting this issue, puts Powell Company in the position of a defendant claiming to be a joint inventor. This is not the case. Appellee, Powell Company, asserted in its answer that the disclosures in patent Re. 23,272 did not originate with appellant but were abstracted or copied from information and data that he obtained from Powell Company and other persons who negotiated with him in good faith. This is not a claim of joint invention but rather that the invention was not made by appellant.

8

Appellees contend that Hobbs was shown not to be the inventor of what patent Re. 23,272 discloses because the idea or principle of invention, that is, a high pressure valve with a pressure seal joint, was disclosed to him in March of 1937 by an advertisement for the Bredtschneider United States patent number 2,029,606. That advertisement described the patent of a high pressure seal and stated it was available for use in pressure vessels such as valves. The findings of fact further show, appellees point out, that appellant actually consulted with the American representative of the holder of the Bredtschneider patent and foreign counterparts and that, subsequently, appellant negotiated and consulted with Powell Company on the design and construction of the pressure seal valves which are the subject matter of patent Re. 23,272. Finding 29 of the trial court indicated that 'as early as 1929 with the issuance of the British counterpart (Ex. 108) of the Bredtschneider United States Patent 2,029,606, the art knew that a high pressure joint corresponding in detail to that of Hobbs' alleged conception drawing * * * was available for pressure vessels, one type of which is a valve.' Further findings indicate that the Bredtschneider patent and thirteen foreign counterparts were owned, in part, by Friedrich Uhde who, subsequent to 1932, after building and testing several pressure vessels incorporating the Bredtschneider joint, manufactured and shipped several devices from his plant in Germany to European countries and to Japan and Manchuria, and that a valve manufactured by Uhde's plant in Germany was shipped to Universal Oil Products Company at Riverside, Illinois and used there successfully from February 15, 1935 to March 15, 1935 for pressures up to 1900 pounds per square inch and to temperatures up to 806 degrees F. On these findings, based on substantial evidence, the court could correctly conclude that appellant conceived no new principle of invention.

9

From these findings and the findings as to the general state of the prior art of valve manufacture, the court below could also conclude that there was anticipation and lack of invention. Patent law provides that there is lack of invention if 'the differences between the subject matter sought to be patented and the prior art are such that the subject matter as a whole would have been obvious at the time the invention was made to a person having ordinary skill in the art to which said subject matter pertains.' 35 U.S.C.A. 103. This court in the recent case of Helms Products, Inc., v. Lake Shore Mfg. Co., 7 Cir., 1955, 227 F.2d 677, 682 stated that this statute sets forth essentially the same test which had been applied in this circuit for a number of years, and which found expression in Foster v. T. L. Smith Co., 7 Cir., 1917, 244 F. 946, 952 as follows: 'If the idea of the patent in suit so obtruded itself from the prior art that the ordinary mechanic could not help from stumbling upon it, then of course no invention was involved.' The district court's holding in the instant case is in accord. A reference to what was known in the prior art indicates what would have been obvious 'at the time the invention was made.' Valve construction prior to 1938 included all the elements found in appellant's valve. The various types of joints, including flanged, welded, screwed, and union bonnet joints were known. The pressure seal was similarly known to the art and the man skilled in the art, could have, as his needs dictated, shifted from one type of joint to another. Appellant's expert admitted this as to all of the types of joints but the pressure seal. Appellant was bound to know the teachings of the art and by merely adapting the teaching as a skilled mechanic would do, he did not achieve patentable invention. Borkland v. Pedersen, 7 Cir., 1957, 244 F.2d 501, 502; Smith v. Dravo Corp., 7 Cir., 1953, 203 F.2d 369, 380-381.

10

Appellant specifically attacks the court's finding that the disclosure of patent Re. 23,272 was 'known to the art more than two years prior to February 23, 1940.' (The date of application for the patent.) It is his contention that the finding, if accurate, lends no support to the conclusion of invalidity since his disclosure was made in the Fall of 1937 when he sent the drawing to various manufacturers. Appellant points out that the court limited its finding to two years prior to the date of the application because of a confusion between the applicable section of the code dealing with obviousness and non-invention (35 U.S.C.A. 103) and the section of the code dealing with other conditions for patentability (35 U.S.C.A. 102).1 The contention of appellant that the finding of the trial court is indicative only of 'obviousness' after the 'disclosure' by him in the Fall of 1937, even leaving aside the question of the worth of his disclosure, still does not prevail against the more basic findings that there was prior art pointing to this claimed invention and making it obvious to the mechanic skilled in the art.

11

Appellant next contends that the presumption of validity of patent Re. 23,272 is heightened by the fact that the evidence of prior art relied on by appellees and the trial court is no better than that before the examiners of the Patent Office and by the fact that these examiners are skilled in the matter of deciding what is or is not obvious, reaching their decision at the critical time. It has been held that the presumption of validity of a patent does not exist as against evidence of prior art not before the Patent Office, Royal Patent Corp. v. Monarch Tool & Mfg. Co., 6 Cir., 1953, 203 F.2d 299, and there is every indication, contrary to appellant's statement, that the prior art was not before the Patent Office at the time it passed on the patent here in issue.

12

The so-called objective tests relied on by appellant to support the position that invention was involved here are not persuasive or impressive if the record is examined closely. Appellant stresses evidence of a long felt want, license acceptance and commercial success of the patent, as well as prior attempts and failures to achieve solution of the bolted bonnet problem.' 'Copying' and acceptance of the patent by the defendant, Powell Company, and skepticism as to the worth of the valve prior to its successful use are also emphasized. There was a finding of the existence of a problem in connection with the bolted bonnet valves and that there had been other attempts and failures to solve this problem. The evidence is not clear that appellant's efforts have alone met with success in this area, nor has the bolted bonnet valve fallen into disuse as a consequence of the alleged invention. In fact, the trial court found that these valves are still offered for use as particularly well-suited for high pressure, high temperature service, and also that the welded bonnet valve used in the prior art for high temperature, high pressure service, is now being manufactured and sold to meet conditions as severe or more severe than those of valves manufactured by appellant's licensees. The evidence of commercial sucess The evidence of commercial success is particularly emphasized. The record shows two licenses, each involving a number of patents of appellant, indicating possibly that as to a group of patents a manufacturer for business reasons would rather pay royalty than be involved in litigation. See Thropp's Sons Co. v. Seiberling, 1924,264 U.S. 320, 329, 44 S. Ct. 346, 68 L. Ed. 708. The skepticism to which appellant refers was directed in the main toward the worth of his valve design submitted to manufacturers for bids. Powell Company explained its license acceptance of the patent, a license which it has since voluntarily abandoned and for which it paid the minimum of $5000 royalty, as a favor to appellant who needed three manufacturers to bid on some Navy contracts and had only two. It should finally be noted that objective considerations cannot lend validity to a patent where as here invention is plainly lacking. See Great A. & P. Tea Co. v. Supermarket Equipment Corp., supra; Goldman v. Bobins, 7 Cir., 1957,245 F.2d 840, 844.

13

Appellant finally urges that the Bredtschneider patent (above) and the Murphy patent 1,350,666, both of which are alleged to be anticipatory of the subject matter of patent Re. 23,272, are mere paper patents, or patents which have never been used commercially and that as such they may not be used to indicate a lack of invention over the prior art. It has been held otherwise. Holland Co. v. American Steel Foundries, 7 Cir., 1952, 196 F.2d 749, 752. See also Royal Patent Corp. v. Monarch Tool & Mfg. Co., 6 Cir., 1953, 203 F.2d 299, 301; Killian & Co. v. Allied Latex Corp., 2 Cir., 1951,188 F.2d 940, 942. In the Killian case, Judge Learned Hand pointed out at page 942: 'The phrase, 'paper patent,' is a mere bit of rhetoric, usually employed as a makeweight by judges who wish to support the patent in suit, but are embarrassed by a reference, of an escape from which they are not too confident. It is a meaningless platitude.' The fact that prior patents have not been used commercially is relevant only in so far as it tends to indicate that the step from them to the patent in suit actually involved invention.

14

Patent Re. 23,272 was also concluded invalid as an aggregation of old elements producing no new result. In urging that the trial court erred in so holding, appellant stresses the findings of fact which indicate that a recognized problem existed as to the bolted bonnet valve, namely that pressure and temperature forces tended to pry open the joint and permit leakage, and the further finding that appellant's valve met this problem receiving 'wide public adoption' and 'extensive commercial success.' Appellant seeks from these findings the conclusion that the purported invention is a new combination or arrangement of old elements producing new results. See Blaw-Knox Co. v. I. D. Lain Co., 7 Cir., 1956, 230 F.2d 373 where this court held valid a combination of three old elements consisting of a concrete spreader a cut off scraper and a vibrating member arranged in a particular position to achieve a new result, that new result amounting to the eradication of the honeycombing effect in the spreading of concrete which had been a problem in the art until then.

15

The pressure seal joint of appellant's valve was present in the prior art and a characteristic of each of the prior art internal seals was that, as pressure within the vessel or valve increased, a tighter seal between cover and body was effected. The valve elements are not claimed to be new except for the inner member, and the trial court indicated (finding 26) that the 'patent to Murphy No. 1,350,066, the patent to Bredtschneider No. 2,029,606, and the Universal Oil Products autoclave prior use and knowledge by Mavity are examples of such internal pressure seals which have abutment members, inner members, gaskets, and means for creating initial seal, generally similar to and the equivalent of the corresponding elements disclosed in Patent Re. 23,272.' The parts of this alleged invention are old and the bringing together of these old elements produces no new result. The change in the joint brought about no change of function of the valve elements or joint elements, and there is no interaction between the various valve and closure elements. See Toledo Pressed Steel Co. v. Standard Parts, Inc., 1939, 307 U.S. 350, 356, 59 S. Ct. 897, 899, 83 L. Ed. 1334, where the Supreme Court held invalid, as an aggregation of two old devices producing no new result, a patent relating to open flame torches. The Court in ruling invalidity emphasized the fact that the separate elements 'performed no joint function. Each served as separately it had done.' Appellant here similarly brought together two old devices to accomplish his objective of providing a seal which would tighten as pressure increased. See also Great A. & P. Tea Co. v. Supermarket Equipment Corp., 1950, 340 U.S. 147, 152, 71 S. Ct. 127, 130, 95 L. Ed. 162 where the Court held invalid as an aggregation a patent on a merchandise counter stating that combination patents should be carefully scrutinized 'with a care proportioned to the difficulty and the improbability of finding invention in an assembly of old elements,' concluding that, 'the function of a patent is to add to the sum of useful knowledge. Patents cannot be sustained when, on the contrary, their effect is to subtract from former resources freely available to skilled artisans.'

16

The alleged invention is at best an improvement of one part of an old combination. Valves with all the valve parts claimed by Hobbs and with various types of joints, including pressure seals, were old to the art. The substitution of a specific pressure seal does not warrant the patent. See Lincoln Engineering Co. v. Stewart-Warner Corp., 1938, 303 U.S. 545, 549-550, 58 S. Ct. 662, 664, 82 L. Ed. 1008, where the Court stated: 'The improvement of one part of an old combination gives no right to claim that improvement in combination with other old parts which perform no new function in combination.' See also the decisions of this court in Aetna Ball & Roller Bearing Co. v. Standard Unit Parts Corp., 7 Cir., 1952, 198 F.2d 222, 227; Hydraulic Press Mfg. Co. v. Williams, White & Co., 7 Cir., 1947, 165 F.2d 489, 494.

17

The trial court admittedly employed an erroneous statutory test in concluding that the specification of patent 23,272 'does not set forth the best mode of carrying out the alleged invention.' The section in question requires only 'the best mode contemplated by the inventor of carrying out the invention.' 35 U.S.C.A. 112. It is unnecessary to consider this point further in view of our holding that the patent is invalid on other grounds.

18

The other patent in suit, patent Re. 23,137, was correctly concluded invalid for anticipation and want of invention. The court in finding 47 stated the following: 'Pressure seal joints in which a wedge-shaped sealing ring was employed to seal between a conical member and a cylindrical surface and in which there was a differential angle between the sealing ring and one of the surfaces, were known to the art long prior to August 15, 1943. An example of such a joint was shown in the proceedings of the American Academy of Arts and Sciences, 1911, in an article published by Dr. P. W. Bridgman. This same disclosure was republished in 1931 in 'The Physics of High Pressure' by Dr. P. W. Bridgman, and again in 1934 in 'The Design and Construction of High Pressure Chemical Plant' by Harold Tongue. The art also had knowledge of other structures employing similar line contact between the sealing ring and the members being sealed, an example being the Bredtschneider Patent No. 2,029,606.'

19

The evidence shows that the prior art understood the basic concept of the pressure seal joint. Appellant chooses to criticize the anticipatory use by Bridgman because of the specific gasket material Bridgman used and because of the difference in differential angle. Patent Re. 23,137 does not, however, provide for a specific type of gasket metal, only 'one softer than the pipe.' As to the angle of differential, appellant seems to take the deposition that patentability is achieved by his use of a smaller differential angle of approximately two degrees which 'operates in a new way and achieves the new result eradicating the defects previously encountered.' As a general rule, it is not invention to change the size or degree of a thing or of any feature or function of a machine or manufacture. See Walker, Patents, Deller's Edition 189 and cases cited and discussed in that text. A classic exception is the case of Eibel Process Co. v. Minnesota & Ontario Paper Co., 1923, 261 U.S. 45, 67, 43 S. Ct. 322, 329, 67 L. Ed. 523 where patentee discovered that an increase in degree of pitch of the Fourdrinier wire of a paper making machine brought about a marked increase in production. The Supreme Court found the change to be directed to a new principle, 'a wholly different object,' from that of the prior art.

20

This court has held that a change of degree is not patentable, Simmons Co. v. Superior Felt & Bedding Co., 7 Cir., 1939, 107 F.2d 536, but see Peerless Equipment Co. v. W. H. Miner, Inc., 7 Cir., 1938, 93 F.2d 98, 103, certiorari denied 303 U.S. 641, 58 S. Ct. 611, 82 L. Ed. 1101, where the court points out: 'It is * * * true that the mere carrying forward of the original thought with a change only in form, proportion or degree, in doing the same thing the same way by substantially the same means, but with better results, is not such invention as will sustain a patent. But where different concepts, purposes and objects are involved, as we understand the law, this rule is not always to be arbitrarily applied, and when different means are employed, followed by success where failure theretofore existed, there is no basis for the application of the rule.'

21

Appellant contends that in the prior art, as indicated by Bridgman's use of a larger differential angle, although it is conceded that no specific angle was denoted by Bridgman, there would be a 'pinching off' effect or detrimental extrusion of metal of the gasket ring. It is urged that this does not occur in appellant's pressure seal joint because, as appellant's expert, Robert Sessions, testified: 'The angle is no small that the area of contact between the sealing ring, the conical surface of the sealing ring, and the beveled or tapered surface of the inner member of the valve or joint, becomes progressively wider quite rapidly, as increasing pressure is applied so that wide area resists further deformation.' We hold that this change does not amount to patentable invention. No 'different concepts, purposes or objects are involved.' It amounts to doing the same thing substantially the same way with better results.

22

The district court (145 F. Supp. 71) also concluded that the claims in suit under patent 23,137 were invalid because 'devices which they are claimed to cover were in public use and sold in this country more than one year' prior to the application for the patent of which Re. 23,137 is the reissue. 35 U.S.C.A. 102(b). This conclusion is based solely on findings that the 1938 valves made by Powell Company and sold to Diamond Alkali had pressure seals responding fully to the claims of patent Re. 23,137, and that in August of 1938, the General Electric Company had sold and delivered to Diamond Alkali a throttle valve employing a pressure seal responding fully to the claims of the patent. These pressure seals were admittedly used in that plant for a period of six years prior to the application for the patent upon which Re. 23,137 was made.

23

Appellant contends that this use of the joints was for experimental purpose prior to application for patent. A use for experimental purposes is not a public use 'if it is conducted in good faith for the purpose of testing the qualities of the invention and for no other purpose not naturally incident to that.' Walker, Patents, Deller's Edition 347. See also Cline Electric Mfg. Co. v. Kohler, 7 Cir., 1928, 27 F.2d 638, 641.

24

The testimony of Hobbs alone supports his contention that the use of the invention was, by oral agreement with Diamond Alkali, an experimental use. He testified that Diamond Alkali spent over a million dollars to develop a plant so that he could experiment with the valves and joint seals in question and that it was their arrangement that all profits (over two million a year, he said) went to the company of which he was a stockholder. This arrangement was purportedly made with the then vice president of Diamond Alkali who is now dead.

25

It is not clear that the trial court rejected this testimony in arriving at its conclusion of law that the use by Diamond Alkali was a 'public use.' The court made no findings of fact to support its conclusions. Not every sale of an invention nor every use in such a public use or sale as indicates an intent to abandon that invention. There is no indication that the trial court even considered this. Appellant relies on Elizabeth v. Pavement Co., 1877, 97 U.S. 126, 24 L. Ed. 1000, which involved an invention for highway pavement. The pavement was installed in a toll road and used publicly for a period of sic years. The Supreme Court held this an experimental use emphasizing the fact that the circumstances of each case must be considered to determine if the inventor actually intended to abandon. Emphasized by the Court were circumstances indicating that Nicholson actually retained control of the invention, that he built the road at his own expense, that he was a stockholder and treasurer of the corporation which collected the tolls, and that his day by day conduct indicated that he intended to apply for a patent when he was satisfied that no further improvements were necessary. Because the trial court in the instant case failed to make the requisite findings, its conclusion of law cannot be sustained. This patent was found invalid for lack of invention, however, and it will not be necessary to remand the case for further findings on the question of public use.

26

In light of our affirmance of the district court's finding of invalidity, a question arises as to the necessity of passing on the defense of non-infringement. The practice of this court has been to give full consideration to both questions. It is appellant's position that the trial court erred as a matter of law in accepting merely immaterial distinctions in name and form alone to conclude that patent Re. 23,272 was not infringed. Infringement is present where there is identity of operation and results and substantial identity of structure. Distinction in name and form alone is legally immaterial. Hunt v. Armour & Co., 7 Cir., 1950, 185 F.2d 722, 728, where this court said: 'The test of infringement is whether the accused device does the same work in substantially the same way and accomplishes the same result.'

27

The Supreme Court has pointed out in Graver Tank & Mfg. Co., Inc., v. Linde Air Products Co., 1950, 339 U.S. 605, 609-610, 70 S. Ct. 854, 857, 94 L. Ed. 1097 that equivalency must be determined against the context of the patent, the prior art and the particular circumstances of the case. It is a determination of fact in which the trial court's decision 'should not be disturbed unless clearly erroneous.' We do not find such to be the case here. The accused valves function as valves and are thus similar to those of appellant. This is not the test. The test is whether the details of the accused valves are identical or equivalent to the details specified in the claims of the patent. Claim 4 is typical of the claims and calls for: 'A valve for high pressure fluid comprising a metal body having a valve-receiving opening, outer and inner telescoped annular members in said opening having axially opposed surfaces, annular packing between said opposed surfaces and engaging the wall of said opening, said outer and inner members and packing being nonrotatable relative to each other, a valve carrying stem extending axially thru said inner member, packing around said stem in said inner member, and means carried by said outer member for actuating said valve stem.'

28

The accused forms 3, 4 and 5 do not embody this structure. In those devices there is a segmental thrust ring of four parts which is placed in the body after the inner member and valve stem, and the four parts are each placed in the body separately and constitute an abutment. The yoke arm is independently mounted on the body. It does not touch and forms no part of the abutment against which the gasket presses to seal between the inner member and the body. In addition, none of the accused's structures have an inner and outer member with a sliding fit. This is important in patentee's structure where there was indicated some kind of guiding function performed by the inner member. Also, the accused valves 1 and 2 do not have any structural needs to prevent relative rotation of the inner and outer members and packing. The court's findings 43 through 45 indicate various other elements of the claims not found in the accused valves.

29

As to patent Re. 23,137, the court found that the accused valves sealed between a conical surface on the bonnet and a conical surface on the body. The accused valves do not seal nor do they have the means to seal between the bonnet and a cylindrical surface on the body as specified in the claims in suit. Appellant's position is that his claim is as to a seal between a conical surface and a 'substantially' cylindrical surface. He maintains that 'substantially cylindrical' is the equivalent of conical, and the departure from a mathematical cylinder does not prevent the realization of the new operation of the patent. Infringement, appellant urges, exists as a matter of law under the doctrine of equivalents. This is true, he states, even if the conical portion of the wall is an improvement, citing Temco Electric Motor Co. v. Apco Mfg. Co., 1927, 275 U.S. 319, at page 328, 48 S. Ct. 170, at page 173, 72 L. Ed. 298 where the Supreme Court stated: 'the improver without a license is an infringer, and may be sued as such.' We do not accept appellant's contention. The joints of the accused valve do not have the same structure nor do they obtain the same result. The Patent Office rejected the broad claims by appellant of seals between conical surfaces. The claim was limited to a seal between a conical surface on the member and a cylindrical surface on the body. The Patent Office later permitted an amendment allowing for a claim of seal between conical and substantially cylindrical surfaces but this does not, as appellant contends, broaden his claim to take in the original rejected claims. Appellant is estopped to claim infringement as to seals between conical surfaces. Lewis v. Avco Mfg. Corp., 7 Cir., 1956, 228 F.2d 919, 924. The district court correctlyheld there was no infringement.

The judgment is

30

Affirmed.

1

A similar confusion is appearent in the district courths finding 50 dealing with patent Re. 23, 137