ArcelorMittal USA LLC v. United States , 302 F. Supp. 3d 1366 ( 2018 )


Menu:
  •                                             Slip Op. 18-
    UNITED STATES COURT OF INTERNATIONAL TRADE
    ARCELORMITTAL USA LLC,
    Plaintiff,
    and
    AK STEEL CORPORATION,
    NUCOR CORPORATION, and
    UNITED STATES STEEL CORPORATION,                   Before: Judge Gary S. Katzmann,
    Plaintiff-Intervenors,           Court No. 16-00173
    v.                                       PUBLIC VERSION
    UNITED STATES,
    Defendant,
    and
    NOVOLIPETSK STEEL PUBLIC JOINT
    STOCK COMPANY,
    Defendant-Intervenor.
    OPINION
    [Motion for Judgment on Agency Record 56.2 on behalf of Plaintiff ArcelorMittal USA LLC and Plaintiff-
    Intervenors AK Steel Corporation, Nucor Corporation, and United States Steel Corporation is denied.]
    Dated:$SULO
    Paul Rosenthal and Melissa Brewer, Kelley Drye & Warren LLP, of Washington, DC, argued for
    plaintiff. With them on the brief were Kathleen W. Cannon, R. Alan Luberda, and John M.
    Herrmann.
    Alan H. Price, Timothy C. Brightbill, and Christopher B. Weld, Wiley Rein LLP, of Washington,
    DC, for plaintiff-intervenor, Nucor Corporation.
    Thomas M. Beline and Sarah E. Schulman, Cassidy Levy Kent LLP, of Washington, DC, for
    plaintiff-intervenor, United States Steel Corporation. On the brief were Jeffrey D. Gerrish and
    Luke A. Meisner, Skadden, Arps, Slate, Meagher & Flom LLP, of Washington, DC.
    PUBLIC VERSION                                                                                 Page 2
    Court No. 16-00173
    Daniel L. Schneiderman and Stephen A. Jones, King & Spalding LLP, of Washington, DC, for
    plaintiff-intervenor, AK Steel Corporation.
    Patricia M. McCarthy, Assistant Director, Commercial Litigation Branch, Civil Division, U.S.
    Department of Justice, of Washington, DC, argued for defendant. With her on the brief were Chad
    A. Readler, Acting Assistant Attorney General, Jeanne E. Davidson, Director, and Renée A.
    Burbank, Senior Trial Counsel. Of counsel on the brief was Lydia C. Pardini, Office of the Chief
    Counsel for Trade Enforcement & Compliance, U.S. Department of Commerce, of Washington,
    DC.
    Valerie Ellis, Curtis, Mallet-Prevost, Colt & Mosle LLP, of Washington, DC, argued for
    defendant-intervenor Novolipetsk Steel Public Joint Stock Company. With her on the brief was
    William H. Barringer.
    Katzmann, Judge: This case presents the confluence of agency determinations, principles
    of the law of contracts, and the interpretation of statute as applied to domestic and foreign generally
    accepted accounting principles. The following questions are posed: in an investigation into
    whether a foreign exporter is selling imported merchandise in the United States market at less than
    fair value, how should the United States Department of Commerce International Trade
    Administration (“Commerce”) determine the date on which the imported merchandise is sold, and
    thus define the universe of sales that fall within Commerce’s period of investigation? When a
    domestic party with a stake in the matter suggests a date of sale that differs from Commerce’s
    selected date, what is, and who carries, the attendant burden of demonstrating the correct date?
    Further, which of the foreign exporter’s financial statements should Commerce use in determining
    its financial expense ratio?
    Plaintiff ArcelorMittal USA LLC (“ArcelorMittal”), on behalf of itself and plaintiff-
    intervenors AK Steel Corporation, Nucor Corporation, and United States Steel Corporation,
    challenges Commerce’s final determination in the less than fair value investigation involving
    imports of certain cold-rolled steel flat products (“cold-rolled steel”) from the Russian Federation
    (“Russia”). See Certain Cold-Rolled Steel Flat Products From the Russian Federation: Final
    PUBLIC VERSION                                                                              Page 3
    Court No. 16-00173
    Determination of Sales at Less Than Fair Value and Final Affirmative Determination of Critical
    Circumstances, in Part, 
    81 Fed. Reg. 49,950
     (Dep’t Commerce July 29, 2016) (“Final
    Determination”) and accompanying Issues and Decisions Memorandum (Dep’t Commerce July
    20, 2016) (“IDM”).
    Specifically, ArcelorMittal argues that: (1) Commerce should have used the date of
    contract between Novex Trading (Swiss) SA (“Novex”) -- the exporting arm of mandatory
    respondent Novolipetsk Steel OJSC (known collectively with its affiliates as “NLMK”) -- and its
    U.S. customers, rather than the date of invoice, as the date of sale in determining the universe of
    transactions subject to investigation; and (2) Commerce should have relied on NLMK’s 2014
    unconsolidated financial statements prepared in accordance with Russian Accounting Standards
    (“RAS”), rather than its 2014 consolidated financial statements prepared in accordance with U.S.
    generally accepted accounting principles (“GAAP”), to calculate NLMK’s financial expense ratio.
    See R. 56.2 Mot. for J. on the Agency Record (June 7, 2017), ECF No. 51; Mem. in support of R.
    56.2 Mot. of Pl. and Pl.-Inters. for J. on the Agency Record (June 7, 2017), ECF Nos. 52–53 (“Pl.’s
    Br.”). Defendant the United States (“the Government”) and defendant-intervenor NLMK oppose
    ArcelorMittal’s motion. See Resp. to Mot. for J. on the Agency Record (Aug. 21, 2017), ECF
    Nos. 55, 58 (“Def.’s Br.”); Resp. to Mot. for J. on the Agency Record (Aug. 21, 2017), ECF Nos.
    56–57 (“Def.-Inter.’s Br.”).
    BACKGROUND
    A.     Legal Background
    Pursuant to United States antidumping laws, Commerce investigates whether there exists,
    and imposes duties on, subject merchandise that “is being, or is likely to be, sold in the United
    States at less than fair value,” i.e. dumped, and that causes material injury or threat of material
    PUBLIC VERSION                                                                                 Page 4
    Court No. 16-00173
    injury to a domestic industry. 
    19 U.S.C. § 1673
     (2012). 1 “The term ‘subject merchandise’ means
    the class or kind of merchandise that is within the scope of an investigation.” 
    19 U.S.C. § 1677
    (25). “[A]n antidumping analysis involves a comparison of export price or constructed export
    price in the United States with normal value in the foreign market.” 
    19 C.F.R. § 351.401
     (2016).
    “Sales at less than fair value are those sales for which the ‘normal value’ (the price a producer
    charges in its home market) exceeds the ‘export price’ (the price of the product in the United
    States).” Apex Frozen Foods Private Ltd. v. United States, 
    862 F.3d 1322
    , 1326 (Fed. Cir. 2017).
    Normal value is defined as “the price at which the foreign like product is first sold . . . in the
    exporting country [i.e., the home market].” 19 U.S.C. § 1677b(a)(l)(B)(i). Export price, or
    constructed export price, means the price at which the subject merchandise is first sold to an
    unaffiliated purchaser in the United States. 19 U.S.C. § 1677a(a)–(b).
    The date on which the subject merchandise is sold in the U.S. market, known in this context
    as the date of sale, factors into the calculation of the export price, which is then compared to normal
    value. See Yieh Phui Enter. Co. v. United States, 35 CIT ___, ___, 
    791 F. Supp. 2d 1319
    , 1322
    (2011). The date of sale therefore defines the universe of sales that fall within Commerce’s period
    of investigation (“POI”), and that are subject to Commerce’s less than fair value determination.
    Commerce’s regulation 
    19 C.F.R. § 351.401
    (i) directs its date of sale determination:
    In identifying the date of sale of the subject merchandise or foreign
    like product, [Commerce] normally will use the date of invoice, as
    recorded in the exporter or producer’s records kept in the ordinary
    course of business. However, [Commerce] may use a date other
    than the date of invoice if [Commerce] is satisfied that a different
    date better reflects the date on which the exporter or producer
    establishes the material terms of sale.
    1
    Citations to the U.S. Code are to the official 2012 edition.
    PUBLIC VERSION                                                                                  Page 5
    Court No. 16-00173
    Commerce thus possesses discretion to select an alternate date of sale; however, an interested party
    proposing a date of sale other than the presumptive invoice date must demonstrate that the material
    terms of sale were “firmly” and “finally” established on its proposed date of sale. Toscelik Profil
    v. Sac Endustrisi A.S., 41 CIT ___, ___, 
    256 F. Supp. 3d 1260
    , 1263 (2017) (citing Antidumping
    Duties; Countervailing Duties: Final Rule, 
    62 Fed. Reg. 27,296
    , 27,348–49 (Dep’t Commerce May
    19, 1997) (“Preamble”)). To successfully rebut Commerce’s presumptive selection of the invoice
    date, an interested party must also demonstrate “that a reasonable mind has one, and only one, date
    of sale choice.” 
    Id.
     (citing Allied Tube and Conduit Corp. v. United States, 
    24 CIT 1357
    , 1371–
    72, 
    127 F. Supp. 2d 207
    , 220 (2000) (“Plaintiff . . . must demonstrate that it presented Commerce
    with evidence of sufficient weight and authority as to justify its [date of sale] as the only reasonable
    outcome. If, however, the record indicates that Commerce’s decision to use the invoice date as
    the date of sale was reasonable and was supported by substantial evidence, Plaintiff’s arguments
    must fail.”)).
    B.      Factual Background
    On July 28, 2015, domestic producers of cold-rolled steel 2 filed petitions with Commerce
    and the U.S. International Trade Commission seeking the issuance of antidumping duty and
    countervailing duty orders on imported cold-rolled steel from Russia and other countries. See
    Petitions for the Imposition of Antidumping and Countervailing Duties: Certain Cold-Rolled Steel
    Flat Products from Brazil, the People’s Republic of China, India, Japan, the Republic of Korea,
    the Netherlands, Russia, and the United Kingdom (July 28, 2015), CR 1–11, PR 1–9. Commerce
    2
    The petitioners were ArcelorMittal USA LLC, AK Steel Corporation, Nucor Corporation, and
    United States Steel Corporation, who are now parties in this case. Final Determination at 49,950
    n.2.
    PUBLIC VERSION                                                                                Page 6
    Court No. 16-00173
    initiated the less than fair value investigation on imports of cold-rolled steel from Russia on August
    17, 2015. See Certain Cold-Rolled Steel Flat Products From Brazil, the People’s Republic of
    China, India, Japan, the Republic of Korea, the Netherlands, the Russian Federation, and the
    United Kingdom: Initiation of Less-Than-Fair-Value Investigations, 
    80 Fed. Reg. 51,198
     (Dep’t
    Commerce Aug. 24, 2015), PR 41. The POI for Russia was July 1, 2014 to June 30, 2015. Id.;
    see 
    19 C.F.R. § 351.204
    (b)(1) (2016).
    Pursuant to 19 U.S.C. § 1677f-1(c)(2), 3 Commerce selected two respondents for individual
    examination: Severstal Export GmbH and PAO Severstal (collectively “Severstal”) and NLMK.
    See Selection of Respondents for the Antidumping Duty Investigation on Certain Cold-Rolled
    Steel Flat Products from the Russian Federation, at 5 & n.15 (Sept. 14, 2015), CR 31, PR 72.
    Commerce issued an antidumping duty questionnaire to NLMK in September 2015. See
    Section A Questionnaire (Sept. 17, 2015), PR 78; Section B–E Questionnaire (Sept. 18, 2015), PR
    82. NLMK responded over the subsequent months. See NLMK’s Section A Questionnaire Resp.
    (Oct. 16, 2015), CR 47–80, PR 108–10 (“Sec. A QR”); NLMK’s Section B Questionnaire Resp.
    3
    In antidumping duty investigations or administrative reviews, Commerce may select mandatory
    respondents pursuant to 19 U.S.C. § 1677f-1(c)(2), which provides:
    If it is not practicable to make individual weighted average dumping
    margin determinations [in investigations or administrative reviews]
    because of the large number of exporters or producers involved in the
    investigation or review, the administering authority may determine
    the weighted average dumping margins for a reasonable number of
    exporters or producers by limiting its examination to—
    (A) a sample of exporters, producers, or types of products that
    is statistically valid based on the information available to the
    administering authority at the time of selection, or
    (B) exporters and producers accounting for the largest
    volume of the subject merchandise from the exporting
    country that can be reasonably examined.
    PUBLIC VERSION                                                                            Page 7
    Court No. 16-00173
    (Nov. 4, 2015), CR 91–106, PR 131–32 (“Sec. B QR”); NLMK’s Section C Questionnaire Resp.
    (Nov. 6, 2015), CR 114–18, PR 140–41 (“Sec. C QR”); NLMK’s Section A Suppl. Questionnaire
    Resp. (Nov. 18, 2015), CR 144–228, PR 164–65 (“Sec. A SQR”); NLMK’s Section B and C Suppl.
    Questionnaire Resp. (Feb. 12, 2016), CR 435–56, PR 274–75 (“Sec. B–C SQR”).
    On March 8, 2016, Commerce published a notice of its affirmative preliminary
    determination of sales at less than fair value for imports of cold-rolled steel from Russia. See
    Certain Cold-Rolled Steel Flat Products from the Russian Federation: Affirmative Preliminary
    Determination of Sales at Less Than Fair Value, Affirmative Preliminary Determination of Critical
    Circumstances, and Postponement of Final Determination, 
    81 Fed. Reg. 12,072
     (Dep’t Commerce
    Mar. 8, 2016), PR 404 and accompanying Preliminary Determination Memorandum (Dep’t
    Commerce Feb. 29, 2016), PR 296 (“PDM”). Commerce noted that under the relevant regulation,
    
    19 C.F.R. § 351.401
    (i), it will normally use a respondent’s date of invoice, as recorded in the
    respondent’s records kept in the ordinary course of business, as the date of sale, unless it
    determines that a different date better reflects the date on which the exporter or producer
    establishes the material terms of sale. PDM at 23. Commerce thus preliminarily determined
    NLMK’s date of sale using Novex’s invoice date, which NLMK had reported to Commerce as the
    date on which the material terms of sale were established. 
    Id. at 24
    ; see Sec. B QR at 24–25.
    Commerce additionally preliminarily based NLMK’s financial expense ratio on NLMK’s
    unconsolidated 2014 fiscal year audited financial statements, prepared in accordance with Russian
    Accounting Standards (“RAS”). PDM at 29; see Sec. A QR at Ex. 24. Commerce preliminarily
    assigned NLMK a weighted average dumping margin of 16.89 percent. 81 Fed. Reg. at 12,073.
    Subsequently, Commerce conducted verification of NLMK’s questionnaire responses.
    Verification of the Cost Response of Novolipetsk Steel OJSC in the Antidumping Duty
    PUBLIC VERSION                                                                                 Page 8
    Court No. 16-00173
    Investigation of Cold-Rolled Flat Products from the Russian Federation (Apr. 26, 2016), CR 629,
    PR 345 (“Cost Verification Report”); Verification of the Sales Response of Novex Trading (Swiss)
    SA and Novolipetsk Steel OJSC in the Antidumping Duty Investigation of Cold-Rolled Flat
    Products from the Russian Federation (June 9, 2016), CR 639, PR 360 (“Sales Verification
    Report”); see 
    19 C.F.R. § 351.307
    (c) (2016). Regarding the date of sale issue, Commerce observed
    that NLMK “consistently reported the invoice date as the date of sale for [the] home market and
    U.S. sales market.” Sales Verification Report at 6.
    In its questionnaire responses and at verification, NLMK provided copies of the handful of
    contracts between Novex and its U.S. customers that pertain to all of NLMK’s reported United
    States transactions during the POI. 4 Sales Verification Exs. SV-23, CR 594, PR 340–41; SV-24,
    CR 595–600, PR 340–41; SV-25, CR 601, PR 340–41; SV-26, CR 602, PR 340–41; see Sec. A
    QR at 18, 20; Sec. B QR at 25; Sec. A SQR at Exhibit SA-4; Sec. B–C SQR at Exhibit S2BC-4.
    Each of these contracts contains two clauses which state that the mill specification sheet appended
    to each contract are integral to the contracts, 5 and another clause stating the quantity covered by
    that contract in metric tons plus or minus a certain percentage. 6 A provision allowing for the
    ultimate sale of a certain quantity above or below a contracted quantity -- found here in the faces
    of the contracts as to each contract’s total quantity, and in the attached mill specification sheets as
    to each specification’s quantity -- is referred to as a “tolerance.” See IDM at 45–47. At
    4
    There are [[   ]] contracts pertaining to [[       ]] transactions.
    5
    [[                           ]] and [[“11. Packing/Marking,”]] both of which state that the mill
    specification sheet appended to each contract [[                                              ]].
    6
    [[                    ]] states the quantity covered by that contract in metric tons plus or minus
    [[                               ]].
    PUBLIC VERSION                                                                                 Page 9
    Court No. 16-00173
    verification, Commerce accordingly examined a handful of sales trace packages for the U.S.
    market. 7 See Sales Verification Report at 6–7. Commerce found that “the specifications contained
    in the contract do not specify the actual quantities or the date of shipment; rather, the quantities
    contained in the contract or specifications were described in a range,” wherein both the total
    contract and each specification denoted quantities and ranges. 
    Id.
     Commerce observed that “[t]he
    actual quantities sold and shipped for each specification are not finalized until the invoice date,”
    and that for a particular specification 8 (“Specification at Issue”) in the contract for U.S. Preselect
    Sale No. 2, found in Sales Verification Exhibit SV-24, 9 the quantity shipped was outside of the
    tolerance for that specification. 
    Id.
     at 6–7; Sales Verification Exhibit SV-24 at 5 (“U.S. Preselect
    Sale No. 2”).
    Regarding the financial expense ratio issue, Commerce observed that “NLMK prepares
    audited consolidated financial statements in accordance with the [GAAP] prevailing in the United
    States” and verified that NLMK’s reported net financial expense ratio is based on the amounts
    reflected in the 2014 fiscal year audited consolidated financial statements prepared in accordance
    with U.S. GAAP. Cost Verification Report at 4, 26. It rejected the use of the 2014 unconsolidated
    RAS statements and 2015 financial statements prepared in accordance with IFRS during the cost
    verification as well. 
    Id.
     at 4–5.
    Petitioners and NLMK filed their respective case briefs on June 17, 2016. Petitioners’
    Case Brief, CR 651–53, PR 372–73; NLMK Case Brief, CR 648, PR 368. The parties filed their
    7
    [[    ]] sales trace packages.
    8
    Specification number [[       ]].
    9
    Internally, this sales contract is labeled [[                      ]].
    PUBLIC VERSION                                                                              Page 10
    Court No. 16-00173
    rebuttal case briefs on June 22, 2016. Petitioners’ Rebuttal Brief, CR 659, PR 379; NLMK
    Rebuttal Brief, CR 654–55, PR 375.
    On July 29, 2016, Commerce published its Final Determination. 
    81 Fed. Reg. 49,950
    .
    Commerce continued to use Novex’s invoice date as the date of sale, because the record evidence
    of the investigation demonstrated that “one or more material terms of Novex’s contracts changed
    after the dates of Novex’s contracts.” IDM at 46. Commerce disagreed with Petitioners that the
    quantity term for a contract would not be altered so long as the final quantity shipped remained
    within the aggregate weight tolerance specified in the contract. 
    Id.
     Even if exceeding contractual
    tolerance provisions were to constitute a material change in quantity, noted Commerce, “it would
    be more appropriate to examine the weight tolerance on a specification basis, rather than a contract
    basis.” 
    Id.
     This was because, Commerce found, each of Novex’s contracts at issue contained a
    combination of specifications of cold-rolled steel, and each specification was different from
    another within the contract. 
    Id.
     “Specification is one of the physical characteristics of [the]
    merchandise under investigation . . . [and] it is associated with industry standards, designation,
    type, or grade of a product.” 
    Id.
     at 46 n.187. Commerce stated that “each of the contracts at issue
    contains specific language demonstrating that mill specification sheets” -- attached to each contract
    and containing quantity tolerances for each specification -- “form an integral part of the sales
    contract.” 
    Id. at 46
    . Commerce found that “the quantity shipped for one specification in one
    contract” -- the Specification at Issue in U.S. Preselect Sale 2, recorded in the NLMK Sales
    Verification Report at Exhibit SV-24 -- “which accounted for a significant portion of the total
    reported U.S. sales is substantially outside the weight tolerance specified in the contract, and thus
    the quantity term of that contract changed after the date of the contract.” 
    Id.
     at 46–47 (citing U.S.
    Preselect Sale No. 2).
    PUBLIC VERSION                                                                              Page 11
    Court No. 16-00173
    Regarding the financial expense ratio issue, Commerce employed NLMK’s U.S. GAAP
    2014 consolidated audited financial statements, rather than the unconsolidated RAS 2014 fiscal
    year audited financial statements that it had used in the preliminary determination to calculate the
    financial expense ratio. IDM at 55. Commerce stated that the consolidated audited financial
    statements “are at the highest level of consolidation available, and the preparation of such
    statements, which follow U.S. GAAP, is permitted by Russian law No 208-F2.” 
    Id.
     Commerce
    further stated that it is the agency’s “long-standing practice to rely on the amounts reported in the
    consolidated financial statements at the highest level available to calculate the net financial
    expense ratio.”    
    Id. at 56
    .    Commerce also explained that it had preliminarily used the
    unconsolidated RAS statements because it was uncertain at that time whether the 2014
    consolidated U.S. GAAP statements represented the highest level of consolidation and included
    the operating results of NMLK. 
    Id. at 53
    .
    Commerce calculated a final weighted-average dumping margin of 1.04 percent for
    NLMK. 10 Final Determination at 49,951. Because the 1.04 percent dumping margin calculated
    for NLMK was less than the 2.0 percent de minimis threshold under the statute, Commerce
    terminated the less than fair value investigation with respect to NLMK. Id.; see 19 U.S.C. §§
    1673d(a)(4), 1673b(b)(3).
    ArcelorMittal initiated this action challenging Commerce’s Final Determination on August
    29, 2016. Summons, ECF No. 1. ArcelorMittal filed its complaint on September 28, 2016.
    Compl., ECF No. 9. AK Steel moved to intervene as plaintiff-intervenor on October 7, 2016. ECF
    10
    Severstal received a 13.36 percent rate, which also became the “all-others” rate.            Final
    Determination at 49,951; see 19 U.S.C. § 1673d(c)(5)(A).
    PUBLIC VERSION                                                                           Page 12
    Court No. 16-00173
    No. 11. The court granted that motion on October 12, 2016. ECF No. 15. Nucor moved to
    intervene as plaintiff-intervenor on October 18, 2016, and the court granted that motion the
    following day. ECF Nos. 16, 20. NLMK moved to intervene as defendant-intervenor on October
    21, 2016. ECF No. 22. The court granted that motion on October 27, 2016. ECF No. 26. U.S.
    Steel moved to intervene as plaintiff-intervenor on October 28, 2016. ECF No. 27. The court
    granted that motion on October 31, 2016. ECF No. 31. 11
    ArcelorMittal moved for judgment on the agency record pursuant to USCIT Rule 56.2 on
    June 6, 2017. Pl.’s Br. The Government and NLMK each responded in opposition on August 21,
    2017. Def.’s Br.; Def.-Inter’s Br. ArcelorMittal filed its reply on November 8, 2017. ECF Nos.
    62–63 (“Pl.’s Reply”). Oral argument was held before the court on January 31, 2018. ECF No.
    72. At the court’s invitation, the parties submitted notices of supplemental authority relevant to
    contentions raised at oral argument between February 6 and 7, 2018. ECF Nos. 73–76.
    11
    On December 21, 2016, the United States moved to stay this action pending the final outcome
    of the three cases challenging the U.S. International Trade Commission’s (“ITC”) negative final
    injury determination in the companion injury investigations that correspond with the
    administrative determination at issue here. Mot. to Stay, ECF Nos. 38–39. The United States
    argued that a stay was warranted because, “until and unless the ITC’s negative final injury
    determination is reversed, the Court cannot provide meaningful relief to plaintiff ArcelorMittal
    USA, LLC, even if ArcelorMittal were to prevail in this action.” Id. at 2. ArcelorMittal opposed
    that motion on January 9, 2017. ECF No. 40. The court granted the United States’ motion on
    January 12, 2017. ECF No. 41. The court separately consolidated the three referenced ITC cases
    under the heading ArcelorMittal USA LLC v. United States, Consol. Case No. 16-00214.
    ArcelorMittal moved for reconsideration of the court’s order one week later. ECF No. 42. In
    response, on February 7, 2017, the United States stated that its counsel “have consulted with ITC
    counsel representing the United States in ArcelorMittal USA LLC v. United States, Consol. Case
    No. 16-00214. Based on these interagency discussions, and to preserve the Court’s and the parties’
    resources across both the Commerce and ITC cases, we request that the Court vacate its January
    12, 2017 order and allow this case to proceed first.” Resp. to Mot. for Reconsideration at 2, ECF
    No. 44. The court thus granted the motion for reconsideration on March 1, 2017, allowing this
    case to proceed while staying Consol. Court No. 16-00214. ECF No. 47.
    PUBLIC VERSION                                                                                 Page 13
    Court No. 16-00173
    JURISDICTION AND STANDARD OF REVIEW
    The Court has jurisdiction over this action pursuant to 
    28 U.S.C. § 1581
    (c) and 19 U.S.C.
    § 1516a(a)(2)(A)(i)(I) and (a)(2)(B)(ii). The standard of review in this action is set forth in 19
    U.S.C. § 1516a(b)(l)(B)(i): “[t]he court shall hold unlawful any determination, finding or
    conclusion found . . . to be unsupported by substantial evidence on the record, or otherwise not in
    accordance with law.”
    DISCUSSION
    I.     Commerce’s Reliance on the Invoice Date as the Date of Sale Is Supported by
    Substantial Evidence and in Accordance with Law.
    “A finding is supported by substantial evidence if a reasonable mind might accept the
    evidence as sufficient to support the finding.” Maverick Tube Corp. v. United States, 
    857 F.3d 1353
    , 1359 (Fed. Cir. 2017) (citing Consol. Edison Co. of N.Y. v. NLRB, 
    305 U.S. 197
    , 229
    (1938)). “The substantiality of evidence must take into account whatever in the record fairly
    detracts from its weight.” CS Wind Vietnam Co. v. United States, 
    832 F.3d 1367
    , 1373 (Fed. Cir.
    2016). This includes “contradictory evidence or evidence from which conflicting inferences could
    be drawn.” Suramerica de Aleaciones Laminadas, C.A. v. United States, 
    44 F.3d 978
    , 985 (Fed.
    Cir. 1994) (quoting Universal Camera Corp. v. NLRB, 
    340 U.S. 474
    , 487 (1951)). However, “[a]n
    agency finding may still be supported by substantial evidence even if two inconsistent conclusions
    can be drawn from the evidence.” Viet I-Mei Frozen Foods Co. v. United States, 
    839 F.3d 1099
    ,
    1106 (Fed. Cir. 2016) (citing Consolo v. Fed. Mar. Comm’n, 
    383 U.S. 607
    , 620 (1966)).
    The date of sale regulation sets forth a rebuttable presumption that “[Commerce] normally
    will use the date of invoice.” 
    19 C.F.R. § 351.401
    (i). As noted supra, Commerce “may use a date
    other than the date of invoice if [Commerce] is satisfied that a different date better reflects the date
    PUBLIC VERSION                                                                                Page 14
    Court No. 16-00173
    on which the exporter or producer establishes the material terms.” Id.; see Sahaviriya Steel Indus.
    Pub. Co. v. United States, 
    304 CIT 709
    , 726, 
    714 F. Supp. 2d 1263
    , 1279 (2010) (“Commerce’s
    methodology is consistent with the principle that a party fails to rebut the presumption that date of
    invoice shall be used where there is a substantial variation between the quantity shipped and the
    tolerance level specified in a contract.”) (citations omitted), aff’d, 
    649 F. 3d 1371
     (Fed. Cir. 2011).
    The Preamble to the date of sale regulation emphasizes Commerce’s focus on locating a meeting
    of the minds between the contracting parties:
    If [Commerce] is presented with satisfactory evidence that the
    material terms of sale are finally established on a date other than the
    date of invoice, [Commerce] will use that alternative date as the date
    of sale. . . . However, [Commerce] emphasizes that in these
    situations, the terms of sale must be firmly established and not
    merely proposed. A preliminary agreement on terms, even if
    reduced to writing, in an industry where renegotiation is common
    does not provide any reliable indication that the terms are truly
    “established” in the minds of the buyer and seller. This holds even
    if, for a particular sale, the terms were not renegotiated.
    62 Fed. Reg. at 27,349. Thus an interested party proposing an alternate date of sale bears the
    burden of demonstrating that the material terms of sale were “firmly” and “finally” established on
    its proposed date. See Toscelik, 256 F. Supp. 3d at 1263 (citing Preamble, 
    62 Fed. Reg. 27,296
    ,
    27,348–49); Allied Tube and Conduit Corp. v. United States, 
    25 CIT 23
    , 25, 
    132 F. Supp. 2d 1087
    ,
    1090 (2001). Accordingly, to successfully rebut Commerce’s presumptive selection of the invoice
    date, an interested party must demonstrate “that a reasonable mind has one, and only one, date of
    sale choice.” Toscelik, 256 F. Supp. 3d at 1263 (citing Allied Tube, 
    127 F. Supp. 2d at 220
    (“Plaintiff, therefore, must demonstrate that it presented Commerce with evidence of sufficient
    weight and authority as to justify its [date of sale] as the only reasonable outcome.”)).
    PUBLIC VERSION                                                                                 Page 15
    Court No. 16-00173
    The parties agree that quantity, price, delivery, and payment are material terms of sale
    relevant to the date of sale determination. 12 Pl.’s Br.; Def.’s Br.; see USEC, Inc. v. United States,
    
    31 CIT 1049
    , 1055, 
    498 F. Supp. 2d 1337
    , 1343 (2007). ArcelorMittal argues that Commerce, in
    the Final Determination, ignored relevant evidence and improperly analyzed other evidence in
    concluding that there were changes in the materials terms of Novex’s United States sales that
    occurred between the contract dates and the invoice dates.            Pl.’s Br. at 17.    Specifically,
    ArcelorMittal argues that Commerce should have analyzed differences in quantity reflected in the
    sales contracts on an aggregate basis, meaning according to the total quantity and accompanying
    tolerance for each contract, rather than on a specification basis. Id. at 22; see IDM at 46.
    ArcelorMittal asserts that the structure of Novex’s sales contracts establish weight tolerances that
    are applicable to the aggregate quantity of the entire order. Pl.’s Br. at 22 (citing Sales Verification
    Report, at Exs. SV-23, SV-24, SV-25, and SV-26; IDM at 47).
    The court is not persuaded by ArcelorMittal’s argument that Commerce improperly
    analyzed quantity differentials between contract dates and corresponding invoice dates on the basis
    of tolerance per specification, rather than aggregate contractual tolerance. As explained supra,
    while each contract at issue features a clause 13 that defines an aggregate weight tolerance for that
    12
    While the Government references only price and quantity in its brief, ArcelorMittal argues that
    Commerce’s administrative practice identifies four criteria as constituting the material terms of
    sale: price, quantity, delivery, and payment. Pl.’s Br. at 16 (citing Sahaviriya Steel, 
    714 F. Supp. 2d at 1280
    ; Nakornthai Strip Mill Pub. Co. v. United States, 
    33 CIT 326
    , 337–38, 
    614 F. Supp. 2d 1323
    , 1334 (2009)). The parties at oral argument agreed that these four criteria constitute material
    terms of sale. Regardless, for the reasons discussed infra, the court’s analysis does not hinge on
    the question of whether delivery and payment also constitute material terms of sale for the purposes
    of the date of sale determination.
    13
    As noted supra n.6, this clause is [[                  ]].
    PUBLIC VERSION                                                                               Page 16
    Court No. 16-00173
    contract plus or minus a certain percentage at seller’s option, each contract also features two
    clauses stating that the mill specification sheet appended to each contract are integral to the
    contract. 14 See Exs. SV-23, SV-24, SV-25, SV-26. A reasonable mind could conclude that the
    integrated mill specification sheets, due to their precision regarding qualities of the specifications
    and the quantity tolerance relevant to each specification therein, are crucial to the “firm[]” and
    “final[]” establishment of the material terms of sale -- specifically, the material term of quantity.
    See Toscelik, 256 F. Supp. 3d at 1263 (citing Preamble, 
    62 Fed. Reg. 27,296
    , 27,348–49). As
    Commerce found, the material term of quantity for at least one specification changed between the
    date of contract and the corresponding date of invoice. IDM at 46. The agency thus reasonably
    determined that the material terms of sale were not “firmly” and “finally” established until the date
    of invoice. 
    Id.
     at 46–47 (citing U.S. Preselect Sale 2, Specification at Issue); 15 see Preamble, 62
    14
    As noted supra n.5, these clauses are [[                            ]] and [[
    ]] both of which state that the mill specification sheet appended to each
    contract [[                                              ]].
    15
    ArcelorMittal also argues that an aggregate, rather than specification-based, weight tolerance
    analysis is consistent with Commerce’s administrative practice. Pl.’s Br. at 22–24 (citing Certain
    Hot-Rolled Carbon Steel Flat Products from Thailand, 
    66 Fed. Reg. 49,622
     (final results), and
    accompanying IDM cmt. 9 (“[A]ny differences between the quantity ordered and the quantity
    shipped which fall within the tolerance specified by the entire contract do not constitute changes
    in the material terms of sale.”); Certain Welded Carbon Steel Pipes and Tubes from Thailand, 
    65 Fed. Reg. 60,910
     (Dep’t Commerce Oct. 13, 2000) (final results), and accompanying IDM cmt. 1
    (determining that the changes in the aggregate shipped quantities from the date of the relevant
    contract to the corresponding date of invoice were within the aggregate weight tolerance agreed to
    by both buyer and seller and thus did not constitute changes to the terms of the contract)).
    The court is not persuaded by this argument. The determinations cited by ArcelorMittal
    address situations where the contract specifies only an aggregate quantity tolerance, rather than
    multiple specifications with accompanying tolerances as in the Novex contracts at issue here. See
    Hot-Rolled Carbon Steel Flat Products from Thailand, 
    66 Fed. Reg. 49,622
    ; Pipes and Tubes from
    Thailand, 
    65 Fed. Reg. 60,910
    . By contrast, Commerce in the instant proceeding reasonably
    explained its decision to compare quantities by specification-based tolerances, rather than
    aggregate tolerances, as explained supra.
    PUBLIC VERSION                                                                               Page 17
    Court No. 16-00173
    Fed. Reg. at 27,296 (“In [
    19 C.F.R. § 351.401
    (i)], we merely have provided that, absent
    satisfactory evidence that the terms of sale were finally established on a different date, [Commerce]
    will presume that the date of sale is the date of invoice.”). ArcelorMittal alternatively argues that,
    even on the basis of comparison between individual specifications in the contract and in the invoice
    -- the methodology Commerce applied here -- there occurred no change in material terms, because
    the altered quantity at issue was minimal. 16 Pl.’s Br. at 26–27. As to the remaining three material
    terms of sale, ArcelorMittal asserts that Commerce addressed none of the record information it
    submitted in its administrative case brief regarding price, delivery, or payment, and that the agency
    cited no record evidence demonstrating any change in those terms between the date of the contract
    and the invoice date for any of the U.S. sales reported by NLMK. 
    Id.
     at 17–20. Altogether,
    ArcelorMittal contends that “in the face of overwhelming evidence demonstrating that all
    quantities remained materially the same but for one transaction of a minimal quantity, Commerce
    nevertheless relied on invoice date. That conclusion was not based on substantial evidence.” 
    Id. at 27
    . Procedurally, ArcelorMittal argues that Commerce did not fairly evaluate the record in this
    regard. 17 Pl.’s Reply at 7–9.
    These arguments fail to rebut the presumption that Commerce will use the invoice date as
    the date of sale under the applicable standard. ArcelorMittal, and not Commerce, must carry the
    16
    ArcelorMittal argues that the single transaction upon which Commerce based its analysis
    accounts for a very small percentage -- specifically, [[      ]] -- of Novex’s entire reported
    United States sales file. Pl.’s Br. at 26, Attachment 1.
    17
    In its notice of supplemental authority submitted following oral argument, ArcelorMittal
    contends that Commerce’s conclusion -- that the quantity change in the invoice for one shipment
    constitutes a change to the material terms of sale established in the contract -- runs contrary to
    contract law principles, under which the quantity change should be considered a shipment of a
    nonconforming good rather than a change to the material terms of sale. Pl.’s Suppl. Auth. at 2,
    ECF No. 75 (citing UNIFORM COMMERCIAL CODE § 2-106(2)).
    PUBLIC VERSION                                                                               Page 18
    Court No. 16-00173
    burden of demonstrating that its proffered date of sale is not merely the superior option but also
    the only reasonable one. See Toscelik, 256 F. Supp. 3d at 1263; Allied Tube, 
    127 F. Supp. 2d at 220
    . ArcelorMittal presents no binding authority establishing that the change in quantity for the
    Specification at Issue, of U.S. Preselect Sale No. 2, is immaterial such that Commerce’s reliance
    on the presumptive invoice date is unreasonable. Pl.’s Br. at 26. Commerce found that this change
    in quantity was “substantially outside the weight tolerance specified in the contract, and thus the
    quantity term of that contract changed after the date of contract.” IDM at 46–47. Just as it was
    reasonable for Commerce to determine that a specification-based quantity analysis was appropriate
    for Novex’s contracts in the record here, so too was it reasonable for Commerce to find that a
    change in quantity beyond the tolerance accompanying at least one of those specifications was
    material. 
    Id.
    Further, the fact that several material terms -- here the price, delivery, and payment terms
    -- were consistent between the date of invoice and the date of contract does not mean that the
    inconsistency in the quantity term is irrelevant to the court’s analysis of Commerce’s date of sale
    determination.    See U.S. Preselect Sale No. 2, Specification at Issue.           That consistency
    notwithstanding, Commerce’s determination to apply the presumptive date of sale -- the invoice
    date -- is reasonable and supported by record evidence in its own right, for the reasons stated supra.
    Under the Court’s standard of review, the possibility of drawing two inconsistent conclusions from
    a given record does not preclude substantial evidence support for either conclusion. See Viet I-
    Mei Frozen Foods, 839 F.3d at 1106. Even assuming arguendo that ArcelorMittal’s proffered date
    of sale were supportable with substantial record evidence, it would not constitute the only
    reasonable option. See Toscelik, 256 F. Supp. 3d at 1263; CC Metals & Alloys, LLC v. United
    States, 40 CIT ___, ___, 
    145 F. Supp. 3d 1299
    , 1305 (2016). Commerce’s conclusion that a
    PUBLIC VERSION                                                                                  Page 19
    Court No. 16-00173
    material term changed between the contract date and the invoice date such that material terms were
    not “firmly” and “finally” established until the latter retains substantial evidence support, even
    where other material terms did not change. 18
    In sum, ArcelorMittal has not rebutted the regulatory presumption favoring the invoice
    date as the date of sale, and Commerce’s determination in regard to that issue stands.
    II.     Commerce’s Use of the Consolidated U.S. GAAP Statements Is Permitted by Statute
    and Supported by Substantial Evidence.
    ArcelorMittal argues that Commerce’s reliance on NLMK’s 2014 consolidated financial
    statements to calculate NLMK’s financial expense ratio is inconsistent with the relevant statute
    and is not supported by substantial evidence. Pl.’s Br. at 28–36. Specifically, ArcelorMittal
    contends that Commerce’s use of consolidated statements prepared in accordance with U.S. GAAP
    is contrary to 19 U.S.C. § 1677b(f)(1)(A)’s directive that a company’s “[c]osts shall normally be
    calculated” using statements prepared in accordance with the exporting or producing country’s
    GAAP and Commerce did not sufficiently justify this alleged departure from the statute. Id. at
    18
    NLMK contends that other material terms, specifically, regarding delivery, did indeed change
    between the contract date and the invoice date. Def.-Inter.’s Br. at 13. NLMK asserts that one of
    its contracts at issue, [[                         ]] states that the shipment date from the port of
    the contract would be at [[                                                            ]]. Def.-Inter.’s
    Br. at 13 (citing Petitioners’ Case Brief at Attachment 1). However, NLMK contends that the bill
    of lading date for this contract was [[                  ]], later than the dates stated in the contract.
    Def.-Inter.’s Br. at 13. Thus, NLMK argues that the delivery terms in the contract were not
    observed, and the presumptive invoice date more accurately accounts for the material terms of
    sale.
    The court notes that Commerce did not analyze this data point, see IDM at 45–47, and
    therefore declines to consider it in regard to the soundness of the agency’s date of sale
    determination. See Changzhou Wujin Fine Chem. Factory Co. v. United States, 
    701 F.3d 1367
    ,
    1377 (Fed. Cir. 2012) (“The grounds upon which an administrative order must be judged are those
    upon which the record discloses that its action was based.” (quoting Sec. & Exch. Comm’n v.
    Chenery Corp., 
    318 U.S. 80
    , 87 (1943))).
    PUBLIC VERSION                                                                            Page 20
    Court No. 16-00173
    28–29. The court finds these arguments unavailing, and holds that Commerce’s determination is
    consistent with the statute and supported by substantial evidence.
    19 U.S.C. § 1677b(f)(1)(A) provides that:
    Costs shall normally be calculated based on the records of the
    exporter or producer of the merchandise, if such records are kept in
    accordance with the generally accepted accounting principles of the
    exporting country (or the producing country, where appropriate) and
    reasonably reflect the costs associated with the production and sale
    of the merchandise. The administering authority shall consider all
    available evidence on the proper allocation of costs, including that
    which is made available by the exporter or producer, in particular
    for establishing appropriate amortization and depreciation periods,
    and allowances for capital expenditures and other development
    costs.
    Since the language of the statute -- i.e., “normally be calculated” -- allows for exceptions to the
    use of records kept in accordance with a country’s GAAP, 19 particularly if those records do not
    19
    Russian law -- particularly, Russian Law No. 208-FZ -- required companies to transition to
    compiling their financial statements under International Financial Reporting Standards (“IFRS”),
    but explicitly permitted “companies that were . . . preparing consolidated financial statements on
    a basis distinct from IFRS . . . to continue preparing their non-IFRS based financial statements
    until 2015.” IDM at 55–56; 3d Sec. D SQR at Exhibit 3-3 (Russian Law No. 208-FZ), C.R. 510,
    P.R. 313. Since NMLK “historically prepared its audited consolidated financial statements in
    accordance with U.S. GAAP,” Commerce verified that the 2014 consolidated statements were
    prepared in accordance with Russian Law No. 208-FZ and thus in accordance with Russian GAAP.
    IDM at 55–56 (stating that Russian GAAP permitted NMLK to “prepare its audited consolidated
    financial statements in accordance with U.S. GAAP” and that the 2014 audited consolidated
    statements were thus “acceptable under Russian GAAP”). ArcelorMittal does not challenge
    Commerce’s conclusion that NMLK’s 2014 consolidated financial statements were prepared in
    accordance with Russian law. However, ArcelorMittal does argue that “[a]lthough Commerce
    concluded that the 2014 consolidated statements were prepared in accordance with U.S. GAAP
    and in compliance with Russian law, this analysis is not consistent with the statutory language,
    which states a clear preference for reliance on respondent’s books and records that are kept in
    accordance with the home country’s GAAP. While Russian law may permit a company to rely on
    U.S. GAAP to prepare its financial statements, this has no bearing on whether such statements also
    accord with Russian GAAP.” Pl.’s Br. at 33. Although defendant-intervenor NMLK disagrees
    with ArcelorMittal’s distinction and argues for a more expansive interpretation of the statute, the
    Government agrees with ArcelorMittal on this issue. Oral Argument. Since this issue is not in
    dispute between ArcelorMittal and the Government in this case, the court declines to discuss it
    further.
    PUBLIC VERSION                                                                               Page 21
    Court No. 16-00173
    reasonably reflect relevant costs, “the question becomes whether Commerce . . . reasonably
    invoked an exception to the rule.” Luoyang Bearing Corp. v. United States, 
    28 CIT 733
    , 743, 
    347 F. Supp. 2d 1326
    , 1338 (2004). When assessing whether records reasonably reflect relevant costs,
    the statute further provides that Commerce “shall consider all available evidence on the proper
    allocation of costs, including that which is made available by the exporter or producer, in particular
    for establishing appropriate amortization and depreciation periods, and allowances for capital
    expenditures and other development costs.” 19 U.S.C. § 1677b(f)(1)(A).
    Here, Commerce selected the statements in question because they were prepared at the
    highest level of consolidation, which reflects longstanding Commerce practice. ArcelorMittal
    contends that Commerce’s use of the consolidated U.S. GAAP statements -- rather than the
    unconsolidated RAS statements -- violates the statute because the statute requires Commerce to
    use statements prepared in accordance with Russian GAAP unless Commerce makes a finding,
    supported by substantial evidence, that the RAS statements do not accurately reflect NLMK’s
    costs. ArcelorMittal further suggests that Commerce impermissibly “bypass[ed] explicit statutory
    guidance governing its calculation of the costs of producing subject merchandise (and, here, the
    calculation of NLMK’s financial expense ratio) and instead rel[ied] on its administrative practice
    as a basis for performing its calculations based on a financial statement that was not prepared in
    accordance with home country GAAP.” Pl.’s Br. at 36.
    However, Commerce chose to use the 2014 consolidated statements not only because of
    longstanding administrative policy, but because it reasonably believed that the unconsolidated
    statements did not reflect NLMK’s expenses as accurately as the consolidated U.S. GAAP
    statements in light of NLMK’s subsidiary relationship to the Fletcher Group. IDM at 56. As the
    Federal Circuit has noted,
    PUBLIC VERSION                                                                           Page 22
    Court No. 16-00173
    standard accounting principles acknowledge consolidated financial
    statements as a fair presentation of the financial position of a group.
    See, Floyd A. Beams, Advanced Accounting 74, 77, 91, 102–03 (5th
    ed. 1992). Following those practices, Commerce has adopted and
    followed a standard policy for assessing finance costs of a producer
    based on the consolidated financial statements of a parent because
    the cost of capital is fungible. Commerce’s policy recognizes that
    consolidated financial statements indicate that a corporate parent
    controls a subsidiary. These consolidated statements represent the
    financial health of parent company operations in view of subsidiary
    operations. In addition, fungible financial assets invite
    manipulation. In other words, if Commerce used only a single
    division of a group as the source of financing costs, the controlling
    entity could shift borrowings from one division to another to defeat
    accurate accounting.
    Am. Silicon Techs. v. United States, 
    334 F.3d 1033
    , 1037 (Fed. Cir. 2003). Thus, Commerce’s
    decision to use the highest consolidated financial statements was reasonable.
    Finally, ArcelorMittal claims that Commerce’s use of the consolidated financial statements
    is inconsistent with the agency’s “expressed preference for financial statements prepared in
    accordance with home country GAAP,” and cites a proceeding involving rebar from Turkey as
    evidence of this preference. Pl.’s Br. at 34; Issues and Decision Memorandum for the Antidumping
    Duty Administrative Review on Certain Steel Concrete Reinforcing Bars from Turkey -- April 1,
    2004, through March 31, 2005 (Dep’t Commerce Nov. 1, 2006) (“Rebar from Turkey”). In that
    proceeding, Commerce addressed 19 U.S.C. § 1677b(f)(1)(A)’s preference for the use of financial
    statements prepared in accordance with home country GAAP when explaining why it chose to use
    statements prepared in accordance with Turkish GAAP instead of statements prepared in
    accordance with International Accounting Standards. Rebar from Turkey cmt. 6. However, in
    Rebar from Turkey, Commerce chose between two sets of unconsolidated statements; here,
    Commerce had consolidated and unconsolidated statements available, distinguishing this case
    from Rebar in Turkey.
    PUBLIC VERSION                                                                         Page 23
    Court No. 16-00173
    For these reasons, the court is unpersuaded by ArcelorMittal’s arguments, and determines
    that Commerce’s use of the 2014 consolidated statements was supported by substantial evidence
    and in accordance with 19 U.S.C. § 1677b(f)(1)(A).
    CONCLUSION
    For the foregoing reasons, Commerce’s Final Determination is sustained.
    So ordered.
    /s/ Gary S. Katzmann
    Gary S. Katzmann, Judge
    Dated:$SULO
    New York, New York